OUR PRODUCTS

Harnessflex CI12-90-AS3 Interface

External Hinged Connector Interface

Single junction 90° elbow interfaces providing high integrity connections between AMP Superseal or Junior timer connectors and Harnessflex conduit systems. These fittings are designed to snap together over all types of slit and unslit conduit, maintaining maximum conduit bore. In addition, 90° elbow versions allow the conduit to swivel 360° around the connector housing.

Harnessflex YPH121212 High Temp Y Piece

TempGuard Hinged Y Piece fittings

One-piece asymmetrical 3 junction fittings allow a variety of conduit variations. These fittings are designed to snap together over all types of slit and unslit Harnessflex conduit, maintaining maximum conduit bore. Can be used as an in-line reducer as well as an enlarger. Full TempGuard system protection is achieved using these fittings with HTC conduit.

Harnessflex CIH08-90-DT3 Interface

High temperature external hinged connector interfaces

90° elbow fittings providing high integrity connections between Deutsch DT connectors and Harnessflex conduit systems. In addition, 90° elbow versions allow the conduit to swivel 360° around the connector housing, sufficient to avoid the problems associated with one-piece interfaces of overflexing due to movement or vibration. Full TempGuard system protection is achieved using these fittings with HTC conduit.

Harnessflex NC28 28mm NC Flexible Conduit – 50m

NC General purpose conduit, Polyamide 6
NC Standard weight conduit is extensively used in harnesses on HGV, off road vehicles and marine applications where a superior protection against impact and mechanical shock is preferred. The conduit is used for both chassis and engine applications and can be used in a wide range of temperatures. Polyamide 6 is highly resistant to all hydrocarbon based oils and fluids and many types of solvents.

Harnessflex CI12-90-DT2 Interface

External Hinged Connector Interface

90° elbow interfaces providing high integrity connections between Deutsch DT connectors and Harnessflex conduit systems. These interfaces are designed to snap together over all types of Harnessflex slit and unslit conduit, maintaining maximum conduit bore. In addition, 90° elbow versions allow the conduit to swivel 360° around the connector housing. Also compatible with Amphenol and Molex connector versions.

Harnessflex CTPA28-S 28mm CTPA Split Flexible Conduit – 100m

CTPA Lightweight Extra flexible conduit, Modified Polyamide 6

CTPA general purpose, lightweight loom conduit suitable for automotive harness applications. It can withstand extremes of temperatures and resists automotive oils and solvents. It is extremely tough and has a high impact strength and fatigue life. CTPA conduits provide protection against mechanical shock and ingress of water whilst maintaining their form through tight bend radii.

Harnessflex CIH08-AS3 Interface

High temperature external hinged connector interfaces for AMP Superseal

Single junction straight interfaces providing high integrity, high temperature connection protection between AS - AMP Superseal connectors and Harnessflex conduit systems.

Harnessflex CIH08-DT3 Interface

High temperature external hinged connector interfaces

Straight fittings providing high integrity connections between Deutsch DT connectors and Harnessflex conduit systems.  Full TempGuard system protection is achieved using these fittings with HTC conduit.

Harnessflex NC25 25mm NC Flexible Conduit – 50m

NC General purpose conduit, Polyamide 6
NC Standard weight conduit is extensively used in harnesses on HGV, off road vehicles and marine applications where a superior protection against impact and mechanical shock is preferred. The conduit is used for both chassis and engine applications and can be used in a wide range of temperatures. Polyamide 6 is highly resistant to all hydrocarbon based oils and fluids and many types of solvents.

Harnessflex CI252825-DRC50 Interface

External Hinged Connector Interface

Two identical half shells snap together onto the twin outlets of the Deutsch DRC50 interface giving a 3 Way conduit fi tting. These interfaces are designed to snap together over all types of Harnessfl ex slit and unslit conduit, maintaining maximum conduit bore.

Harnessflex SWPG13 Face Sealing Washer

Accessories

Face sealing washers to be used with Harnessflex sealed fittings.

Harnessflex CI08-90-DT6 Interface

External Hinged Connector Interface

90° elbow interfaces providing high integrity connections between Deutsch DT connectors and Harnessflex conduit systems. These interfaces are designed to snap together over all types of Harnessflex slit and unslit conduit, maintaining maximum conduit bore. In addition, 90° elbow versions allow the conduit to swivel 360° around the connector housing. Also compatible with Amphenol and Molex connector versions.

OUR BRANDS

LATEST NEWS