Showing 613–648 of 2824 results

CCTV Adaptor for DAF 4 Pin Male to Male – 15cm

CCTV adaptor for DAF trucks: 4 Pin Male aviation to male with positive & negative fly leads - 0.15m

CCTV Cable | 1m

CCTV cable with waterproof connectors - 1m

CCTV Cable | 3m

CCTV cable with waterproof connectors - 3m

CCTV Cable | 5m

CCTV cable with waterproof connectors - 5m

CCTV Camera Infra-red Colour with Audio |Mirror Image

Durite mirror image rear facing 1/3" Sony CCD colour CCTV camera with audio and microphone. Automatic gain control (AGC). L 84 x W 76 x D 70mm. Waterproof to IP68. E Marked

CCTV Forward Facing Colour Camera

Forward facing colour CCTV camera. CMOS image sensor. Automatic gain control (AGC). 4 infrared LEDs. L 20 x W 41 x D 29mm. E-marked.

CCTV H/D Retractable Suzi Cable 3.5M

Closed Circuit Television H/D Retractable Suzi Cable. Suzi Cable 3.0M Working Length.{bul}Protected to IP67{/bul}

CCTV H/D Retractable Suzi Cable Kit – 3M

Suzi Cable 3M Working Length, Vehicle End 10Metres Length with a Female 4PIN Plug,Trailer End 0.3Metres Length with Male 4 PIN Plug.{bul}Protected to IP67{/bul}

CCTV Hard Wire Kit – 12V/24V

Power to your CCTV kits or Dash Camera with no stray wires. Simply attach to the fuse box & insert your CCTV plug. Compatible with any Durite CCTV powered via a standard 12V plug. Comes with 3 Fuse Adapters: ATO, LOW PROFILE and MICRO for ease of connection to fuse box and suited 2A Fuses. 3 Meters of cable for hard wire installation. 5A Max Current. Durite CCTV Hardwire Kit - fits all Durite CCTV.

CCTV Heavy Duty Retractable Cable Kit – Screw Fit

Durite CCTV heavy duty retractable cable kit allows you extend the connections for your Durite CCTV System and easily switch and link up with other trailers.

CCTV Kit 7″ TFT, I/R 1080P Side Cam, 12/24V

Durite great value 2-channel camera system suitable for 12V/24V applications. Benefit:{bul}Suitable for both 12V & 24V commercial vehicles{/bul}{bul}Clear TFT-LCD monitor{/bul}{bul}Fully waterproof (IP69K) and crystal clear infrared camera{/bul} Kit includes:{bul}7" 2-channel TFT-LCD colour monitor{/bul}{bul}Fully waterproofed 960H infrared camera protected to IP69K{/bul}{bul}10m cable{/bul}

CCTV Number Plate 25cm Colour Camera

Rear view number plate 25cm colour CCTV camera. CMOS image sensor. Protected to IP68. L 250 x D 23mm. E-Marked.

CCTV Number Plate Colour Camera

Rear view number plate box colour CCTV camera. Small, compact & easy to install. CMOS image sensor. Protected to IP68. L 23 x W 40 x D 23mm. E-Marked.

CCTV Twin Camera Infra-red Colour with Sound MIRROR Image |Black

Front & rear twin CCD colour camera. CMOS image sensor. Automatic gain control (AGC). 16 infrared LEDs (per camera). Protected to IP68. L 82 x W 109.8 x D 67.7mm. E-marked.

Chromed Brass Number Plate Lamp – 12V

Chrome plated brass Supplied with 2 x 12 volt 4 watt MCC bulbs. EEC, ECE and SAE approved.

Clear Front LED Marker Lamp – 12/24

Durite clear front LED marker lamp is supplied with an ABS bracket for flexible & easy mounting
  • 2 x SMD LEDs & reflex reflector
  • Protected to IP67
  • 150mm flying leads
  • L 114 x W 66 x H 8mm
  • E-Marked R10, R3 & R7 approved
  • }

    Clear LED Front Marker & Reflex Reflector Lamp with Superseal Plug – 12/24V

    12/24 volt LED Clear front marker with plug, requires connector 0-011-62. Protected to IP67.

    Clear LED Front Marker Lamp with Reflex Reflector and Screw Cable Connections – 24V

    24 volt LED clear front marker lamp, with reflex reflector and screw cable connections. l 108 x w 33 x h 58mm. EEC and ECE approved.

    Commercial LED Reverse Lamp with Stud Fixing – 12/24V

    140mm 12/24V Commercial LED reverse lamp with stud fixing. Black plastic body. l 140 x w 82 x h 140mm. ECE approved

    Commercial Vehicle Wide Angle Glass Mirror Head – 193 x 193mm

    193 x 193mm. Clamps to 16-28mm arms. ECE approved, class IV.

    Connector 2 Pole High Current Grey 175 amp Bg1

    With silver plated solid copper terminals. Rated 175 amp.

    Connector 2 Pole High Current Red 50 amp Bg1

    With silver-plated solid copper terminals. Rated 50 amp.

    Current Loading Ballast for 12V LED Indicator Lamp

    Durite current loading ballast for 12v LED indicator lamp is suitable for:
  • 0-097-60
  • 0-300-50, 0-300-75
  • 0-294-70, 0-294-71, 0-294-75
  • }