Trolley Manual Start Assist/Charger – 6/12/24V 60A 175A Start
6/12/24 volt, 60 amp trolley heavy-duty start assist/charger with charge timer for professional use. ‘Hi’, ‘Medium’ and ‘Low’ charge rate options with 175 amp ‘Start Assist’, voltmeter, ammeter and thermal auto-reset overload protection. Powder coated steel case, rubber wheels and chromium plated handle. Supplied with crocodile clip and leads.
White PIR Timer Switch – 12/24V, 5A
Durite's easy to install slim PIR. Built in PIR sensor/switch, 35 second timer, extends battery life. Low energy consumption. Low Profile Design - only 22mm. E-type Approved ECE R10 12/24 volt. 5.0Amp. Waterproof to IP67. 5 Meter Detection Distance. 35 second timer - Once the sensor has been triggered, this timer unit will automatically switch the connected lamps on for a period of 35 seconds before automatically switching off. If continuous movement is detected then the lights in the vehicle will remain on. The maximum current draw that is permitted via the relay is 5.0 Amps Max. Low profile design - These surface mounted units are only 22mm in depth therefore keeping obstruction to the minimum.
WHITE Self-Adhesive Continuous Reflective Tape – 50mm x 50m
Durite high performance white reflective tape 50mm x 50m. Rigid grade white reflective tape is for suitable for use on articulated & rigid vehciles and trucks. ECE-104 Class C approved. Weatherproof material resists pressure wash. Can be used on the sides of vehicles as per regulation ECE-104R. Easy to apply.
Wireless Switch Panel With Bluetooth Remote – 12/24V
Durite Wireless Bluetooth Control Box for all Durite Warning Lights, Driving Lights and Work Lights with a max of 20A. Compatible with all Durite lights up to 20A Input: 10-30V 20A Max; 600W Max Output: 10-30V 20A Max / 10A other ports 250W Max per port Control Solution: Wire + Remote Control (50M Transmission Distance) RJ Connector Overload Protection 50M Control Transmission Distance Driving Light: ON/OFF and HIGH/LOW Beam Warning Light: ON/OFF and Mode Control Protected to IP67 E-Marked R10 EMC, RoHS, CE & UKCA }
