Showing 289–324 of 2688 results

6.30mm Multiple Connector Female Receptacle Housing – 2 Way Vertical Pk 1000

6.30mm Multiple Connector Female Receptacle Housing - 2 Way Vertical Pk 1000

6.5A 9 Step Fully Automatic Digital Battery Charger Maintainer – 6/12V

Automatic battery charger/maintainer for all lead acid batteries including NORM, AGM, STD, GEL & Li-phosphate (Lifepo4). 6/12V 6.5A output. Features 9 stage charging and microprocessor control allowing the unit to be left permanently connected without harming the battery. Supplied with crocodile clips. Waterproof to IP65. CE approved.

60W LED Driving Work Lamp Bar With Position Lamp – 12/24V

Durite LED driving work lamp bar features a position lamp. Supplied with a 3-PIN DT connector & 500mm flying leads.
  • 60W; 20 x 3W LEDs & 14 position LEDs
  • 6000 Lumens
  • Protected to IP67
  • Aluminium housing with polycarbonate lens
  • L 293 x W 80 x H 83.5mm
  • E-Marked R10 EMC, R148/149 approved
  • }

    61W Cube LED Driving Lamp With Wide Angle Flood Beam – 12/24V

    Durite cube LED driving lamp features a wide angle flood beam of 140° for better vision & road safety. Supplied with 500mm flying leads & 2-PIN DT connector
  • 9 x 5W & 8 x OSRAM LEDs
  • 6920 Lumens
  • Protected to IP67/IP69K
  • Colour temperature: 5700K
  • ECE R112 and R10.05 approved. CE. RoHS
  • }

    64GB micro SDXC Class 10, UHS-I, speeds up to 80MB/s read, 10MB/s write with full size adapter

    64GB micro SDXC Class 10, UHS-I, speeds up to 80MB/s read, 10MB/s write with full size adapter Disclaimer:
  • Check device for compatibility and size ratings
  • Maximum useable capacity will be less than displayed on the product due to format and system usage
  • SD cards have a finite life but they should outlast the device
  • SD cards should be inserted and removed correctly, check device instructions for proper technique, if not the data could be corrupted
  • Read and write speeds may vary between devices and configurations
  • 65W Dual Function LED Driving Lamp With DRL & DT Connector – 12/24V

    This high-quality super bright R10 dual function LED driving lamp features a Driving High Beam 10 x LEDs (65W) and Daytime Running Light 7 X LEDs (0.3W), giving you extra bright light on the road to see further so you can react sooner.
  • 9" Driving high beam & DRL with DT connector
  • 6400Lm
  • 10 X LEDs Driving high beam (65W); 7 X LEDs DRL (0.3W)
  • Black aluminium housing, PC lens with stainless steel SS304 bracket
  • Protected to IP66
  • E-Marked R10 EMC, R112 & R87 approved
  • (L) 244 x (W) 120 x (H) 163mm
  • }

    7-Way Terminal Block – 2 x 5.4mm diameter, 5 x 4mm diameter Pk 1

    2 x 5.4mm diameter, 5 x 4mm diameter. Single fixing hole, 3.2mm diameter.

    7″ 1080p AHD Mirror Monitor (2 camera inputs) – 12/24V

    Durite 7” 2-channel mirror monitor is suitable for most cabins and ensures robust installation on all vans.
  • Easy to install, just clips onto existing rear view mirror (compatible with rear view mirrors 63.2mm to 82mm)
  • Supports up to 2 cameras
  • Features a parking guideline
  • Suitable for both 12/24V vehicles
  • E-Marked, R10 EMC, CE & UKCA approved
  • 7″ Camera System (2 camera inputs, incl. 1 x rear & side camera) |Mirror image

    Minimise blind spots whilst manoeuvring with our 2 camera entry level reversing kit. Mirror image.
  • Perfect for both 12V & 24V applications; vans, rigid vehicles and articulated lorries
  • Clear display with high resolution TFT LCD monitor
  • Mirror image infra-red cameras for day & night vision
  • Kit includes
  • 1 x 7" monitor (0-776-28)
  • 1 x Rear camera (0-776-29)
  • 1 x Side camera (0-776-24)
  • 1 x 20m cable (0-775-19)
  • 1 x 5m cables (0-775-25)
  • 7″ DL3 Smart Touchscreen Monitor, Bracket and 5m cable

    7" DL3 Smart Touchscreen Monitor, Bracket and 5m cable

    7″ Mirror Monitor Number Plate Cam Kit (2 cam inputs, incl. 1 x 25cm rear number plate cam)

    Durite 2-channel rear view number plate camera system features a 7" Colour mirror monitor & 1 rear view 25cm colour camera.
  • Suitable for 12V/24V applications.
  • High resolution monitor and bracket is suitable for most cabins while the shielded cable ensures robust installation
  • Colour camera protected to IP68
  • CMOS image sensor
  • Comes with remote control
  • 1 additional camera can be used with this kit
  • 7″ Monitor Number Plate Cam Kit (2 cam inputs, incl. 1 x 25cm rear view number plate cam)

    Durite 2-channel rear view number plate camera system, includes 7" Colour TFT LCD monitor & 1 rear view 25cm colour camera.
  • Suitable for 12V/24V applications
  • High resolution monitor and bracket is suitable for most cabins while the shielded cable ensures robust installation
  • Colour camera protected to IP68
  • CMOS image sensor
  • Comes with remote control
  • 1 additional camera can be used with this kit
  • 7″ Multi Monitor Wireless Camera System (4 cam inputs, incl. 4 x 7″ monitors & 1 x cam)

    Durite agricultrual CCTV kit is supplied with 4 x 7" wireless colour monitors & a wireless 1/3" CMOS camera with sound. Monitor:
  • Up to 4-channels
  • TFT LCD display
  • Each monitor supports up to 128GB max
  • Camera:
  • Infrared LEDs
  • Waterproof to IP69K
  • 500TVL
  • 7″ QUAD TFT LCD CCTV Monitor (4 camera inputs with split view) – 12/24V

    Durite 4-channel 7" QUAD colour TFT LCD monitor with inputs for up to 4 cameras.
  • Split QUAD display
  • Suitable for 12/24V applications
  • E Marked ECE R10 approved
  • 7″ Round Headlamp Unit, Dip/Main Beam – Right Hand Drive

    Super powerful 14 x 5W CREE LED 7 Inch Round headlamp for right hand drive vehicles. 12/24VDC. 70W Main Beam (4900lm), 55W Dipped Beam (3850lm) and a 3W Position Lamp. IP67. Black. Aluminium housing & Polycarbonate Lens. H4 to H13 adaptor included. E Marked R7, R112. Applications: Off-road vehicles, trucks, engineering vehicles, special vehicles (Fire engine, police cars, rescue vehicles), forklifts, trains, boats & buses

    7″ ROUND LED HEADLAMP WITH DT CONNECTOR – 12/24V

    The Durite 7" Round LED Headlamp with DT Connector has up to 50,000 hours life time, 10-30V and up to 1500Lms.
    • Switchable white and amber LED
    • Supports additional off road function
    • 10-30V
    • Roughly 50,000 hours life time
    • 158W max power
    • Protected to IP66 and IP69K
    • CE, E Marked, R148, R149, R10, EMC protected

    7″ Split Screen CCTV Monitor (2 camera inputs with fan bracket) – 12/24V

    Durite 2-channel 7" split screen monitor with inputs for up to 2 cameras.
  • View 2 cameras on one screen
  • Sunshade & U-shape steel bracket
  • E-Marked ECE R10 approved